VOYAGER 1 JUPITER PLASMA DERIVED ION MOMENTS 96 SEC

THIS DATA SET CONTAINS THE BEST ESTIMATES OF THE TOTAL ION DENSITY AT JUPITER DURING THE VOYAGER 1 ENCOUNTER IN THE PLS VOLTAGE RANGE (10-5950 EV/Q). IT IS CALCULATED USING THE METHOD OF MCNUTT ET AL. (1981) WHICH TO FIRST ORDER CONSISTS OF TAKING THE TOTAL MEASURED CURRENT AND DIVIDING BY THE COLLECTOR AREA AND PLASMA BULK VELOCITY. THIS METHOD IS ONLY ACCURATE FOR HIGH MACH NUMBER FLOWS DIRECTLY INTO THE DETECTOR, AND MAY RESULT IN UNDERESTIMATES OF THE TOTAL DENSITY OF A FACTOR OF 2 IN THE OUTER MAGNETOSPHERE. THUS ABSOLUTE DENSITIES SHOULD BE TREATED WITH CAUTION, BUT DENSITY VARIATIONS IN THE DATA SET CAN BE TRUSTED. THE LOW RESOLUTION MODE DENSITY IS USED BEFORE 1979 63 1300, AFTER THIS THE LARGER OF THE HIGH AND LOW RESOLUTION MODE DENSITIES IN A 96 SEC PERIOD IS USED SINCE THE L-MODE SPECTRA OFTEN ARE SATURATED. COROTATION IS ASSUMED INSIDE L=17.5, AND A CONSTANT VELOCITY COMPONENT OF 200 KM/S INTO THE D CUP IS USED OUTSIDE OF THIS. THESE ARE THE DENSITIES GIVEN IN THE MCNUTT ET AL. (1981) PAPER CORRECTED BY A FACTOR OF 1.209 (.9617) FOR DENSITIES OBTAINED FROM THE SIDE (MAIN) SENSOR. THIS CORRECTION IS DUE TO A BETTER CALCULATION OF THE EFFECTIVE AREA OF THE SENSORS. DATA FORMAT: COLUMNS 1-6 ARE TIME (YEAR, DAY, HOUR, MIN, SEC, MSEC) COLUMN 7 IS THE MOMENT DENSITY IN CM-3. EACH ROW HAS FORMAT (6I4, E12.3). VALUES OF 1.E32 INDICATE THAT THE PARAMETER COULD NOT BE OBTAINED FROM THE DATA USING THE STANDARD ANALYSIS TECHNIQUE. ADDITIONAL INFORMATION ABOUT THIS DATASET AND THE INSTRUMENT WHICH PRODUCED IT CAN BE FOUND ELSEWHERE IN THIS CATALOG. AN OVERVIEW OF THE DATA IN THIS DATA SET CAN BE FOUND IN MCNUTT ET AL. (1981) AND A COMPLETE INSTRUMENT DESCRIPTION CAN BE FOUND IN BRIDGE (1977).