CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Aqua-NOAA20 Edition4B

CER_SYN1deg-MHour_Terra-Aqua-NOAA20_Edition4B is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Aqua-NOAA20 Edition4B data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; CERES FM3, CERES FM4, CERES Scanner, and MODIS on Aqua; and FM6 CERES Scanner, and VIIRS on NOAA-20. Data collection for this product is ongoing. The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes in order to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, and surface fluxes and computed fluxes that have been adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS and geostationary satellite cloud properties along with atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are made for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions. The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to more accurately model variability between CERES observations. To use GEO data to enhance diurnal sampling, several steps are involved. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. To ensure GEO and CERES TOA fluxes are consistent, a normalization technique is used. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation. CERES is a key component of the Earth Observing System (EOS) program. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, protoflight model (PFM), was launched on November 27, 1997 as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.

Data and Resources

Additional Info

Field	Value
Maintainer	Earthdata Forum
Last Updated	May 18, 2026, 19:11 (UTC)
Created	June 18, 2025, 21:06 (UTC)
accessLevel	public
bureauCode	{026:00}
catalog_conformsTo	https://project-open-data.cio.gov/v1.1/schema
harvest_object_id	fe18c8c6-db0f-4cbb-9ac2-1c2d79f66073
harvest_source_id	b99e41c6-fe79-4c19-bbc3-9b6c8111bfac
harvest_source_title	Science Discovery Engine
identifier	10.5067/TERRA-AQUA-NOAA20/CERES/SYN1deg-MHour_L3.004B
license	https://www.usa.gov/government-works
modified	2026-05-14T22:12:38Z
programCode	{026:000}
publisher	NASA/LARC/SD/ASDC
resource-type	Dataset
source_datajson_identifier	true
source_hash	77a5d7bdc4531263ff17c79b020c488b8970d94406e0a5e12fe8d30508ed619e
source_schema_version	1.1
spatial	["CARTESIAN",[{"Boundary":{"Points":[{"Latitude":-90,"Longitude":-180},{"Latitude":-90,"Longitude":180},{"Latitude":90,"Longitude":180},{"Latitude":90,"Longitude":-180},{"Latitude":-90,"Longitude":-180}]}}]]
temporal	2000-03-01/2026-05-14
theme	{"Earth Science"}