This dataset contains water surface elevations at selected point locations generated from the AirSWOT data collected during the Spring and Fall 2021 Delta-X deployments over the Atchafalaya and Terrebonne basins in Louisiana, USA. AirSWOT uses near-nadir wide-swath Ka-band radar interferometry to measure water-surface elevation and produce continuous gridded elevation data. The Level 3 (L3) data were created by masking land areas out of the AirSWOT Level 2 products, then filtering and averaging to the AirSWOT heights to produce water surface elevations at selected points throughout the scene. The AirSWOT elevation data are useful for calibrating elevation and slopes along the main channels, as well as tying observations to open ocean tidal conditions. AirSWOT performance in the floodplain was limited by the presence of vegetation and the very small slope characteristic of two dimensional floodplain discharge. Therefore, the bulk of the AirSWOT data collections were targeted at the larger channels, since the channel discharge provides the necessary boundary conditions for potential overflow to islands and floodplains. The data are provided in comma-separated values (CSV) format.

This dataset contains Level 2 (L2) AirSWOT geocoded products, including estimated water surface elevation. The AirSWOT instrument is a Ka-band interferometer and for this study is flown on the King Air B200 platform. Data were collected during the DeltaX airborne campaign over the Atchafalaya and Terrebonne basins of the Mississippi River Delta, Louisiana, USA. Flights occurred during the Delta-X Spring 2021 deployment from 2021-03-26 to 2021-04-18 and the Delta-X Fall 2021 deployment from 2021-08-21 to 2021-09-12. AirSWOT is capable of producing high resolution (3.6 m) digital elevation models over land and water bodies using near-nadir wide-swath Ka-band radar interferometry to measure water-surface elevation and produce continuous gridded elevation data. The instrument includes six antennas that form multiple baseline pairs for along-track and across-track interferometry. AirSWOT elevation data are useful for calibrating elevation and slopes along the main channels, as well as tying observations to open ocean tidal conditions and is an airborne calibration and validation instrument for the Surface Water and Ocean Topography (SWOT) satellite. This Version 3 dataset provides updated data files due to an updated Calumet survey that changed the water level by 0.138 m. This resulted in all the AirSWOT water levels changing by that same amount. For these L2 products, only the estimated water surface elevation in respect to the WGS84 ellipsoid surface, and estimated height above the NAVD88 (GEOID12B) vertical datum files changed. Note that data acquired on September 1 and September 5, 2021 do not meet the expected MAE in-situ comparison and should be used with caution. This dataset contains cloud optimized GeoTIFF rasters in UTM map coordinates for each flight line. In addition, a text file provides basic metadata, including flight line ID, start and end UTC times of data acquisition, processor version number, and the date and time of different processing stages.

This data set contains rasterized snow depth maps derived from lidar point cloud data collected from Grand Mesa, Colorado during the SnowEx20 campaign. The subset data file was used as input data to derive SWE and snow density data, which is available as SnowEx20 Grand Mesa IOP Lidar and GPR-Derived Snow Water Equivalent and Snow Density, Version 1.

Biomass weight & nitrogen content for plants collected along transects & dried

This data set provides LiDAR point clouds and digital terrain models (DTM) from surveys over the K34 tower site in the Cuieiras Biological Reserve, over forest inventory plots in the Adolpho Ducke Forest Reserve, and over sites of the Biological Dynamics of Forest Fragments Project (BDFFP) in Rio Preto da Eva municipality near Manaus, Amazonas, Brazil during June 2008. The surveys encompass the K34 eddy flux tower managed through the Large-scale Biosphere-Atmosphere Experiment in Amazonia, forest inventory plots managed by the Programa de Pesquisa em Biodiversidade (PPBio), and sites managed by the BDFFP. The LiDAR data was collected to measure forest canopy structure across Amazonian landscapes to monitor the effects of selective logging on forest biomass and carbon balance, and forest recovery over time.

This data set provides LiDAR point clouds and digital terrain models (DTM) from surveys over the Tapajos National Forest in Belterra municipality, Para, Brazil during late June and early July 2008. The surveys encompass the K67 and K83 eddy flux towers and a deforestation chronosequence managed through the Large-Scale Biosphere-Atmosphere Experiment in Amazonia providing long-term flux measurements of carbon dioxide. The LiDAR data was collected to measure forest canopy structure across Amazonian landscapes to monitor the effects of selective logging on forest biomass and carbon balance, and forest recovery over time.

This dataset provides estimates of carbon dioxide (CO2) and methane (CH4) diffusive fluxes from waterbodies, and watershed landcover data for the central-interior of the Yukon-Kuskokwim Delta (YK delta), Alaska. Dissolved concentrations of methane and carbon dioxide were predicted using an integrated terrestrial-aquatic approach to scale observations based on landscape and waterbody remote sensing drivers. The observations include ~300 samples of surface water dissolved gases collected in July 2016-2019 from the central region of the YK Delta, Alaska. A machine learning model was used to generate estimated fluxes. Model inputs include Sentinel-2 MSI with derived normalized difference vegetation index (NDVI) and normalized difference water index (NDWI), an Arctic digital elevation model (DEM) with derived slope and flow accumulation, Sentinel-1 C-band July and December VV and VH composites, and a landcover map. Waterbody size, shape, and reflectance were determined using object-based image analysis in Google Earth Engine. Landscape-level input data were averaged in non-nested sub-basins calculated using the System for Automated Geoscientific Analyses (SAGA) "channel network" algorithm at three threshold sizes. Cross validation was used to tune and select variables for gradient boosting models. The trained gradient boosting models were then used to predict dissolved methane and carbon dioxide in all waterbodies (~17,000) in the region. These aquatic concentrations were converted to fluxes using an average gas transfer velocity from observations (0.33 m/d). The data are provided in GeoTIFF and shapefile formats.

Elevation contours over the NSA and SSA in ARC/Info Generate Format. Data cover portions of the BOREAS Northern Study Area (NSA) and Southern Study Area (SSA) and are on a scale of 1:50,000.

This data set provides digital terrain models, snow depth, and canopy height, acquired by a scanning lidar system and derived from Point Cloud Digital Terrain Models (PCDTMs) from two regions of Alaska, USA collected as part of the NASA SnowEx 2023 field campaign. The study sites include a boreal forest environment in the Fairbanks region of central Alaska (the Bonanza Creek Experimental Forest, Caribou Poker Creek watershed, and Farmer’s Loop/Creamer’s Field) and a coastal tundra environment in the North Slope region of the northern Alaska coastal plain (Arctic coastal plain and Upper Kuparuk Toolik). The raw data from which these data are derived are available as SnowEx23 Airborne Lidar Scans Raw, Version 1.

An integrated input data set for ecosystem and vegetation modeling for the conterminous United States: Georeferencing