This data set provides spatial distributions of fast ice and glacial ice in eight fjords spanning the Southeast Greenland coast: Nansen, Kangerlusruaq, Ikertivaq, Skjoldungen, Tingmiarmiut, Napasorsvaq, Anoritup, and Kangerlluluk. Temporal coverage is discontinuous, depending on the availability and quality of images.

Fjord data were sourced from USGS EarthExplorer, Copernicus Open Access Hub, and the NSIDC. Landsat-8 and MODIS imagery for ice identification were collected from NASA Worldview and USGS EarthExplorer. Fjord, fast ice, and glacial ice boundaries were manually delineated using ArcGIS. Glacial ice was further categorized as dense glacial melange (Type 3), substantial glacial ice with large icebergs (Type 2), low-density glacial ice with large icebergs (Type 1), consistent small ice surface without large icebergs (Type 0), or glacier surface (Type 99).

This dataset contains ice concentration rankings of S-band images from the S-BAND marine navigation radar collected during the 2022 Salinity and Stratification at the Sea Ice Edge (SASSIE) campaign. SASSIE is a NASA experiment that aims to understand how salinity anomalies in the upper ocean generated by melting sea ice affect sea surface temperature (SST), stratification, and subsequent sea-ice growth. SASSIE involved a field campaign that sampled the transition from summer melt to autumn ice advance in the Beaufort Sea during August-October 2022, making intensive in situ and remote sensing observations within ~200km of the sea ice edge. Images from the radar were digitized and saved every 10-60 seconds on days that the R/V Wolstad was in or around ice. Ice concentration rankings ranging from 0 to 3 determined by VGG19 Machine Learning Model. L2 summary data are available in NetCDF format.

The data set is a time-series of snow pit measurements obtained by the SnowEx community during the 2021 field campaign. etween November 2020 and May 2021 data from 247 snow pits were collected at 24 unique sites distributed over 4 states (CO, ID, MT, UT) throughout the Western United States. Five of the unique sites had a single visit to establish baseline conditions, while the remaining 19 sites had 3 or more repeat visits throughout the season, with a median visit count of 11.5. On a weekly interval, a snow pit was dug approximately 1 m away from the previous week’s snow pit. Available measured parameters are: snow depth, snow temperature, snow density, stratigraphy, grain size, manual wetness, liquid water content (LWC), and snow water equivalent (SWE). Also available are photos of the field notes and snow pit sites.

This data set represents an updated version of the MODIS Snow Covered Area and Grain-size (MODSCAG) and MODIS Dust Radiative Forcing in Snow (MODDRF) data sets previously produced by the NASA Jet Propulsion Laboratory (JPL). Data are derived from near real-time MODIS/Terra surface reflectance data (MOD09GA_NRT) and include the following parameters: snow fraction, snow grain size (form the SCAG algorithm), vegetation fraction, rock fraction, ice fraction, shade fraction, deltavis, radiative forcing, and optical snow grain size (from the DRFS algorithm). Data are available from 19 October 2023 to the present and are currently available for five regions in the western United States (MODIS tiles h08v04, h08v05, h09v04, h09v05, h10v04). Additional tiles will be added over time. These data are provided in GeoTiff format.

This data set provides tracer parcels to simulate sea ice advection paths in the Northern Hemisphere combined with sea ice concentration data. Sea ice parcels are identified in 25 km grid cells where sea ice concentrations are greater than 15% and tracked daily using Polar Pathfinder Daily 25 km EASE-Grid Sea Ice Motion Vectors (NSIDC-0116). Locations are updated weekly to determine whether an ice parcel has melted and should be tracked. Columns represent the EASE-grid x, y, and sea ice concentration values for each week over the 12 month tracking period and rows depict distinct simulated ice parcels.

This data set provides locations and depths of melt ponds in the Multi-Year Arctic Sea Ice Region, calculated from ATLAS/ICESat-2 L2A Global Geolocated Photon Data, Version 5 (ATL03) using an autoadaptive algorithm.

M2TUNXFLX (or tavgU_2d_flx_Nx) is a time-averaged 2-dimensional monthly diurnal means data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilated surface flux diagnostics, such as total precipitation, bias corrected total precipitation, surface air temperature, surface specific humidity, surface wind speed, and evaporation from turbulence. The “surface” in this data collection is the model surface layer. The heights of the model surface layer (HLML) vary with time and location, with the value of ~60 meter above ground. This data collection is the monthly mean of data fields for each hour and time-stamped with the central time of an hour starting from 00:30 UTC, e.g.: 00:30, 01:30, … , 23:30 UTC.

MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month.

Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.

MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.

Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may email the question on data access to the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov), or the question on science to the MERRA-2 science team (merra-questions@lists.nasa.gov).

M2TMNXOCN (or tavgM_2d_ocn_Nx) is a time-averaged 2-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of ocean surface diagnostics, such as open water skin temperature (sea surface temperature), open water latent energy flux, open water upward sensible heat flux, and open water net downward longwave ( or shortwave ) flux . The collection also includes variance of certain parameters.

MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month.

Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.

MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.

Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may email the question on data access to the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov), or the question on science to the MERRA-2 science team (merra-questions@lists.nasa.gov).

GLAH06 is used in conjunction with GLAH05 to create the Level-2 altimetry products. Level-2 altimetry data provide surface elevations for ice sheets (GLAH12), sea ice (GLAH13), land (GLAH14), and oceans (GLAH15). Data also include the laser footprint geolocation and reflectance, as well as geodetic, instrument, and atmospheric corrections for range measurements. The Level-2 elevation products, are regional products archived at 14 orbits per granule, starting and stopping at the same demarcation (± 50° latitude) as GLAH05 and GLAH06. Each regional product is processed with algorithms specific to that surface type. Surface type masks define which data are written to each of the products. If any data within a given record fall within a specific mask, the entire record is written to the product. Masks can overlap: for example, non-land data in the sea ice region may be written to the sea ice and ocean products. This means that an algorithm may write the same data to more than one Level-2 product. In this case, different algorithms calculate the elevations in their respective products. The surface type masks are versioned and archived at NSIDC, so users can tell which data to expect in each product. Each data granule has an associated browse product.

GLAH06 is used in conjunction with GLAH05 to create the Level-2 altimetry products. Level-2 altimetry data provide surface elevations for ice sheets (GLAH12), sea ice (GLAH13), land (GLAH14), and oceans (GLAH15). Data also include the laser footprint geolocation and reflectance, as well as geodetic, instrument, and atmospheric corrections for range measurements. The Level-2 elevation products, are regional products archived at 14 orbits per granule, starting and stopping at the same demarcation (± 50° latitude) as GLAH05 and GLAH06. Each regional product is processed with algorithms specific to that surface type. Surface type masks define which data are written to each of the products. If any data within a given record fall within a specific mask, the entire record is written to the product. Masks can overlap: for example, non-land data in the sea ice region may be written to the sea ice and ocean products. This means that an algorithm may write the same data to more than one Level-2 product. In this case, different algorithms calculate the elevations in their respective products. The surface type masks are versioned and archived at NSIDC, so users can tell which data to expect in each product. Each data granule has an associated browse product.