The MODIS/Aqua Terra Thermal Anomalies/Fire locations 1km FIRMS Near Real-Time (NRT) - Collection 61 processed by NASA's Land, Atmosphere Near real-time Capability for EOS (LANCE) Fire Information for Resource Management System (FIRMS), using swath products (MOD14/MYD14) rather than the tiled MOD14A1 and MYD14A1 products. The thermal anomalies / active fire represent the center of a 1km pixel that is flagged by the MODIS MOD14/MYD14 Fire and Thermal Anomalies algorithm (Giglio 2003) as containing one or more fires within the pixel. This is the most basic fire product in which active fires and other thermal anomalies, such as volcanoes, are identified.

MCD14DL are available in the following formats: TXT, SHP, KML, WMS. These data are also provided through the LANCE FIRMS Fire Email Alerts. Please note only the TXT and SHP files contain all the attributes.

Collection 61 data replaced Collection 6 (DOI:10.5067/FIRMS/MODIS/MCD14DL.NRT.006) in April 2021. The C61 processing does not contain any updates to the science algorithm; changes were made to improve the calibration approach in the generation of the Terra and Aqua MODIS Level 1B products.

CER_SYN1deg-Month_Terra-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and and geostationary (GEO)-Enhanced Top of Atmosphere (TOA), Within-Atmosphere and Surface Fluxes Clouds and Aerosols Monthly Terra Edition4A data product, which was collected using Imaging Radiometers on Geostationary Satellites platform as well as CERES Flight Model 1 (FM1), CERES FM2, and MODIS on Terra. Data collection for this product is complete.

CERES Synoptic (SYN) 1-degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the NASA Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product offers parameters on a three-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to accurately model variability between CERES observations. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.

CER_SYN1deg-3Hour_Terra-NPP_Edition1A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Three-Hourly Terra-Suomi National Polar-orbiting Partnership (NPP) Edition1A data product. Data was collected using several instruments on multiple platforms including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM5, CERES Scanner, and Visible-Infrared Imager-Radiometer Suite (VIIRS) on NPP. Data collection for this product is complete.

The CERES Synoptic (SYN) 1 degree (SYN1deg)products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The calculated fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product offers parameters on a three-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

CERES SYN1deg products use 1-hourly radiances and cloud property data from GEO imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi NPP satellite on October 28, 2011. The newes

CER_SYN1deg-1Hour_Terra-NPP_Edition1A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA) Within-Atmosphere and Surface Fluxes, Clouds and Aerosols One-Hourly Terra-Suomi National Polar-orbiting Partnership (NPP) Edition 1A data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM5, CERES Scanner, and Visible-Infrared Imager-Radiometer Suite (VIIRS) on SUOMI-NPP. Data collection for this product is complete.

The CERES Synoptic Radiative Fluxes and Clouds (SYN) 1-degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The calculated fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product offers parameters on a one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the long-wave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi NPP satellite on October 28, 2011. The newest CE

CER_SYN1deg-MHour_Terra-NPP_Edition1A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Suomi National Polar-orbiting Partnership (NPP) Edition1A data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM5, CERES Scanner, and Visible-Infrared Imager-Radiometer Suite (VIIRS) on Suomi National Polar-orbiting Partnership (NPP). Data collection for this product is complete.

The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the long-wave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the proto flight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit onboard the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched onboard Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched onboard the Suomi

CER_SYN1deg-MHour_Terra-NOAA20_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Aqua Edition4A data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM6 CERES Scanner, and VIIRS on NOAA-20. Data collection for this product is ongoing.

The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on

CER_SYN1deg-MHour_Terra-Aqua-NOAA20_Edition4B is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Aqua-NOAA20 Edition4B data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; CERES FM3, CERES FM4, CERES Scanner, and MODIS on Aqua; and FM6 CERES Scanner, and VIIRS on NOAA-20. Data collection for this product is ongoing.

The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes in order to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, and surface fluxes and computed fluxes that have been adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS and geostationary satellite cloud properties along with atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are made for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to more accurately model variability between CERES observations. To use GEO data to enhance diurnal sampling, several steps are involved. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. To ensure GEO and CERES TOA fluxes are consistent, a normalization technique is used. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key component of the Earth Observing System (EOS) program. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, protoflight model (PFM), was launched on November 27, 1997 as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on b

CER_SYN1deg-MHour_Terra-Aqua-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra-Aqua Edition4A data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM3, FM4 CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Aqua. Data collection for this product is ongoing.

The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product offers parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011

CER_SYN1deg-MHour_Terra-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly-Averaged 1-Hourly Terra Edition4A data product. Data was collected using the CERES Imaging Radiometers on the Geostationary Satellites platform and CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on the Terra platform. Data collection for this product is complete.

The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, and surface fluxes and computed fluxes that have been adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are made for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly-averaged one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique is used to ensure GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the proto flight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit onboard the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched onboard Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched onboard the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was lau

CER_SYN1deg-Month_Terra-NPP_Edition1A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA) Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly Terra-Suomi National Polar-orbiting Partnership (NPP) Edition1A data product. Data was collected using the CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM5, CERES Scanner, and Visible-Infrared Imager-Radiometer Suite (VIIRS) on NPP. Data collection for this product is complete.

The CERES SYN1deg products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a monthly temporal resolution on 1°-regional, zonal, and global spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.

The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.

CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi NPP satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on boar