The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS IR Level 1B QA Subset contains Quality Assurance (QA) parameters that a user of may use to filter AIRS IR Level 1B radiance data to create a subset of analysis. QA parameters indicate quality of granule-per-channel, scan-per-channel, field of view, and channel and should be accessed before any data of analysis. It also contains "glintlat", "glintlon", and "sun_glint_distant" that users can use to check for possibility of solar glint contamination.

WARNING: On 2021/09/23 the EOS Aqua executed a Deep Space Maneuver (DSM). In the DSM, the spacecraft is turned such that the normal Earth field of regard is deep space.

The thermal impact of the DSM caused a shift of the centroids of spectral response functions (SRF) of about 1% of the width of the SRF, equivalent to a frequency shift of 9 parts per million. This shift is reflected in the “spectral_freq” parameter (observed frequencies) in the L1b v5 files for each 6 minute granule. The magnitude of the effect on brightness temperatures (BT) depends on the spectral gradient of each channel. Maximum BT shifts are approximately +- 0.5 K, although many channels experience far smaller BT shifts. Approximately 1803 channels have BT shifts of less than 0.1 K and 575 channels are now shifted in BT by more than 0.1 K, while 231 of these channels have BT shifts greater than 0.2 K.

Users of the L1b v5 product who are concerned that these shifts may impact their science investigations and applications are encouraged to switch to the AIRS L1c v6.7.4 product, which, among many other improvements, converts the spectra to a fixed frequency grid. END OF WARNING.

The AIRS Level 1B Near Real Time (NRT) product (AIRIBRAD_NRT_005) differs from the routine product (AIRIBRAD_005) in 2 ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Infrared (IR) level 1B data set contains AIRS calibrated and geolocated radiances in milliWatts/m^2/cm^-1/steradian for 2378 infrared channels in the 3.74 to 15.4 micron region of t he spectrum. The AIRS instrument is co-aligned with AMSU-A so that successive blocks of 3 x 3 AIRS footprints are contained within one AMSU-A footprint. The AIRIBRAD_NRT_005 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 90 footprints across track by 135 lines along track.

WARNING: On 2021/09/23 the EOS Aqua executed a Deep Space Maneuver (DSM). In the DSM, the spacecraft is turned such that the normal Earth field of regard is deep space.

The thermal impact of the DSM caused a shift of the centroids of spectral response functions (SRF) of about 1% of the width of the SRF, equivalent to a frequency shift of 9 parts per million. This shift is reflected in the “spectral_freq” parameter (observed frequencies) in the L1b v5 files for each 6 minute granule. The magnitude of the effect on brightness temperatures (BT) depends on the spectral gradient of each channel. Maximum BT shifts are approximately +- 0.5 K, although many channels experience far smaller BT shifts. Approximately 1803 channels have BT shifts of less than 0.1 K and 575 channels are now shifted in BT by more than 0.1 K, while 231 of these channels have BT shifts greater than 0.2 K.

Users of the L1b v5 product who are concerned that these shifts may impact their science investigations and applications are encouraged to switch to the AIRS L1c v6.7.4 product, which, among many other improvements, converts the spectra to a fixed frequency grid. END OF WARNING.

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Infrared (IR) level 1B data set contains AIRS calibrated and geolocated radiances in milliWatts/m^2/cm^-1/steradian for 2378 infrared channels in the 3.74 to 15.4 micron region of t he spectrum. The AIRS instrument is co-aligned with AMSU-A so that successive blocks of 3 x 3 AIRS footprints are contained within one AMSU-A footprint. The AIRIBRAD_005 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 90 footprints across track by 135 lines along track.

WARNING: On 2021/09/23 the EOS Aqua executed a Deep Space Maneuver (DSM). In the DSM, the spacecraft is turned such that the normal Earth field of regard is deep space.

The thermal impact of the DSM caused a shift of the centroids of spectral response functions (SRF) of about 1% of the width of the SRF, equivalent to a frequency shift of 9 parts per million. This shift is reflected in the “spectral_freq” parameter (observed frequencies) in the L1b v5 files for each 6 minute granule. The magnitude of the effect on brightness temperatures (BT) depends on the spectral gradient of each channel. Maximum BT shifts are approximately +- 0.5 K, although many channels experience far smaller BT shifts. Approximately 1803 channels have BT shifts of less than 0.1 K and 575 channels are now shifted in BT by more than 0.1 K, while 231 of these channels have BT shifts greater than 0.2 K.

Users of the L1b v5 product who are concerned that these shifts may impact their science investigations and applications are encouraged to switch to the AIRS L1c v6.7.4 product, which, among many other improvements, converts the spectra to a fixed frequency grid. END OF WARNING.

This product is a 324-channel subset of the AIRIBRAD_NRT_005 product in which the AMSU footprints from AIRABRAD_NRT_005 product are also included and converted to binary Universal Form for the Representation of meteorological data (BUFR). The AIRS and AMSU Level 1B products differ from routine processing in 2 ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors.

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. AIRS/Aqua Level-1B calibration subset including clear cases, special calibration sites, random nadir spots, and high clouds. The AIRS Visible/Near Infrared (VIS/NIR) level 1B data set contains AIRS visible and near-infrared calibrated and geolocated radiances in W/m^2/micron/steradian. This data set is generated from AIRS level 1A digital numbers (DN), including 4 channels in the 0.4 to 1.0 um region of the spectrum.

The AIRS Level 1B Near Real Time (NRT) product (AIRIBQAP_NRT_005) differs from the routine product (AIRIBQAP_005) in 2 ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The Atmospheric Infrared Sounder (AIRS) is a facility instrument aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. AIRS data will be generated continuously. Global coverage will be obtained twice daily (day and night) on a 1:30pm sun synchronous orbit from a 705-km altitude. The AIRS IR Level 1B QA Subset contains Quality Assurance (QA) parameters that a user of may use to filter AIRS IR Level 1B radiance data to create a subset of analysis. QA parameters indicate quality of granule-per-channel, scan-per-channel, field of view, and channel and should be accessed before any data of analysis. It also contains "glintlat", "glintlon", and "sun_glint_distant" that users can use to check for possibility of solar glint contamination.

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. The AIRS Granule Map Product consists of images of granule coverage in PDF and JPG format. The images are daily ones but updated every 6 minutes to capture any new available granule. Granules are assembled by ascending, descending, in north and south hemisphere, and the maps are in global cylindrical projection and satellite projection for better view.

The AIRMISR_LUNAR_LAKE_2001 data were acquired during a flight over Lunar Lake, Nevada on June 30, 2001. The Jet Propulsion Laboratory (JPL) in Pasadena, California provided the data. The Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) is an airborne instrument for obtaining multi-angle imagery similar to that of the satellite-borne Multi-angle Imaging SpectroRadiometer (MISR) instrument, which is designed to contribute to studies of the Earth's ecology and climate. AirMISR flies on the NASA ER-2 aircraft. The Jet Propulsion Laboratory in Pasadena, California built the instrument for NASA. Unlike the satellite-borne MISR instrument, which has nine cameras oriented at various angles, AirMISR uses a single camera in a pivoting gimbal mount. A data run by the ER-2 aircraft is divided into nine segments, each with the camera positioned to a MISR look angle. The gimbal rotates between successive segments, such that each segment acquires data over the same area on the ground as the previous segment. This process is repeated until all nine angles of the target area are collected. The swath width, which varies from 11 km in the nadir to 32 km at the most oblique angle, is governed by the camera's instantaneous field-of-view of 7 meters cross-track x 6 meters along-track in the nadir view and 21 meters x 55 meters at the most oblique angle. The along-track image length at each angle is dictated by the timing required to obtain overlap imagery at all angles, and varies from about 9 km in the nadir to 26 km at the most oblique angle. Thus, the nadir image dictates the area of overlap that is obtained from all nine angles. A complete flight run takes approximately 13 minutes. The 9 camera viewing angles are:0 degrees or nadir26.1 degrees, fore and aft45.6 degrees, fore and aft60.0 degrees, fore and aft70.5 degrees, fore and aft For each of the camera angles, images are obtained at 4 spectral bands. The spectral bands can be used to identify vegetation and aerosols, estimate surface reflectance and ocean color studies. The center wavelengths of the 4 spectral bands are:443 nanometers, blue555 nanometers, green670 nanometers, red865 nanometers, near-infrared Two types of AirMISR data products are available - the Level 1 Radiometric product (L1B1) and the Level 1 Georectified radiance product (L1B2).

The AIRMISR_HARVARD_2003 data set was asquired during a flight over the Harvard Forest, Massachusetts, USA, target as part of the AirMISR deployments from the Wallops Flight Facility during the August 2003 campaign. This particular flight took place on August 24, 2003. The Jet Propulsion Laboratory (JPL) in Pasadena, California provided the data. There were a total of two runs during this flight. A run comprises data collected from nine view angles acquired on a fixed flight azimuth angle. Each data file from one run contains either: a) Level 1B1 Radiometric product from one of the 9 camera angles or b) Level 1B2 Georectified radiance product from one of the 9 camera angles. Browse images in PNG format are available for the Level 1B1 product and browse images in JPEG format are available for the Level 1B2 product. The Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) is an airborne instrument for obtaining multi-angle imagery similar to that of the satellite-borne Multi-angle Imaging SpectroRadiometer (MISR) instrument, which is designed to contribute to studies of the Earth's ecology and climate. AirMISR flies on the NASA ER-2 aircraft. The Jet Propulsion Laboratory in Pasadena, California built the instrument for NASA. Unlike the satellite-borne MISR instrument, which has nine cameras oriented at various angles, AirMISR uses a single camera in a pivoting gimbal mount. A data run by the ER-2 aircraft is divided into nine segments, each with the camera positioned to a MISR look angle. The gimbal rotates between successive segments, such that each segment acquires data over the same area on the ground as the previous segment. This process is repeated until all nine angles of the target area are collected. The swath width, which varies from 11 km in the nadir to 32 km at the most oblique angle, is governed by the camera's instantaneous field-of-view of 7 meters cross-track x 6 meters along-track in the nadir view and 21 meters x 55 meters at the most oblique angle. The along-track image length at each angle is dictated by the timing required to obtain overlap imagery at all angles, and varies from about 9 km in the nadir to 26 km at the most oblique angle. Thus, the nadir image dictates the area of overlap that is obtained from all nine angles. A complete flight run takes approximately 13 minutes. The 9 camera viewing angles are:0 degrees or nadir26.1 degrees, fore and aft45.6 degrees, fore and aft60.0 degrees, fore and aft70.5 degrees, fore and aft For each of the camera angles, images are obtained at 4 spectral bands. The spectral bands can be used to identify vegetation and aerosols, estimate surface reflectance and ocean color studies. The center wavelengths of the 4 spectral bands are:443 nanometers, blue555 nanometers, green670 nanometers, red865 nanometers, near-infrared Two types of AirMISR data products are available - the Level 1 Radiometric product (L1B1) and the Level 1 Georectified radiance product (L1B2). The Level 1 Radiometric product contains data that are scaled to convert the digital output of the cameras to radiances and are conditioned to remove instrument-dependent effects. Additionally, all radiances are adjusted to remove slight spectral sensitivity differences among the detector elements of each spectral band. These data have a 7-meter spatial resolution at nadir and around 30-meter at the most oblique 70.5 degree angles. The Level 1 Georectified radiance product contains the Level 1 radiometric product resampled to a 27.5 meter spatial resolution and mapped into a standard Universal Transverse Mercator (UTM) map projection. Initially the data are registered to each camera angle and to the ground. This processing is necessary because the nine views of each point on the ground are not acquired simultaneously. Once the map grid center points are located in the AirMISR imagery through the process of georectification, a radiance value obtained from the surrounding AirMISR pixels is assigned to that ma

The AIRMISR_MORGAN_MONROE_2003 data were acquired during a flight over the Morgan Monroe State Forest, Indiana, USA, target as part of the AirMISR deployments from the Wallops Flight Facility during the August 2003 campaign. This particular flight took place on August 19, 2003. The Jet Propulsion Laboratory (JPL) in Pasadena, California provided the data. There were a total of two runs during this flight. A run comprises data collected from nine view angles acquired on a fixed flight azimuth angle. Each data file from one run contains either: a) Level 1B1 Radiometric product from one of the 9 camera angles or b) Level 1B2 Georectified radiance product from one of the 9 camera angles. Browse images in PNG format are available for the Level 1B1 product and browse images in JPEG format are available for the Level 1B2 product. The Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) is an airborne instrument for obtaining multi-angle imagery similar to that of the satellite-borne Multi-angle Imaging SpectroRadiometer (MISR) instrument, which is designed to contribute to studies of the Earth's ecology and climate. AirMISR flies on the NASA ER-2 aircraft. The Jet Propulsion Laboratory in Pasadena, California built the instrument for NASA.Unlike the satellite-borne MISR instrument, which has nine cameras oriented at various angles, AirMISR uses a single camera in a pivoting gimbal mount. A data run by the ER-2 aircraft is divided into nine segments, each with the camera positioned to a MISR look angle. The gimbal rotates between successive segments, such that each segment acquires data over the same area on the ground as the previous segment. This process is repeated until all nine angles of the target area are collected. The swath width, which varies from 11 km in the nadir to 32 km at the most oblique angle, is governed by the camera's instantaneous field-of-view of 7 meters cross-track x 6 meters along-track in the nadir view and 21 meters x 55 meters at the most oblique angle. The along-track image length at each angle is dictated by the timing required to obtain overlap imagery at all angles, and varies from about 9 km in the nadir to 26 km at the most oblique angle. Thus, the nadir image dictates the area of overlap that is obtained from all nine angles. A complete flight run takes approximately 13 minutes.The 9 camera viewing angles are:0 degrees or nadir26.1 degrees, fore and aft45.6 degrees, fore and aft60.0 degrees, fore and aft70.5 degrees, fore and aftFor each of the camera angles, images are obtained at 4 spectral bands. The spectral bands can be used to identify vegetation and aerosols, estimate surface reflectance and ocean color studies. The center wavelengths of the 4 spectral bands are:443 nanometers, blue555 nanometers, green670 nanometers, red865 nanometers, near-infraredTwo types of AirMISR data products are available - the Level 1 Radiometric product (L1B1) and the Level 1 Georectified radiance product (L1B2). The Level 1 Radiometric product contains data that are scaled to convert the digital output of the cameras to radiances and are conditioned to remove instrument-dependent effects. Additionally, all radiances are adjusted to remove slight spectral sensitivity differences among the detector elements of each spectral band. These data have a 7-meter spatial resolution at nadir and around 30-meter at the most oblique 70.5 degree angles. The Level 1 Georectified radiance product contains the Level 1 radiometric product resampled to a 27.5 meter spatial resolution and mapped into a standard Universal Transverse Mercator (UTM) map projection. Initially the data areregistered to each camera angle and to the ground. This processing is necessary because the nine views of each point on the ground are not acquired simultaneously. Once the map grid center points are located in the AirMISR imagery through the process of georectification, a radiance value obtained from the surrounding AirMISR pixels is assigned to tha