TL3ATM_5 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 5 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This product consists of monthly atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels.

The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.

The TES Aura L3 ATD data consist of daily atmospheric temperature and VMR for the atmospheric species. Data are provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolates the L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF - EOS-EOS grid data. A separate product file is produced for each different atmospheric species. TES obtains data in two basic observation modes: Limb or Nadir. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing are the terms 'Daily' and 'Monthly' representing the approximate time coverage of the L3 products. However the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey will not be split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represent a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products are 'daily' and 'monthly'. L3 data is provided at uniform grids in latitude and longitude and at selected pressure levels. Details of the format of this product can be found in the TES Data Products Specifications (DPS) which is available from the LaRC ASDC site: https://eosweb.larc.nasa.gov/project/tes/DPS

TL3ATD_5 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Daily Gridded Version 5 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This product consists of daily atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels.

The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.

The TES Aura L3 ATD data consist of daily atmospheric temperature and VMR for the atmospheric species. Data are provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolates the L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF - EOS-EOS grid data. A separate product file is produced for each different atmospheric species. TES obtains data in two basic observation modes: Limb or Nadir. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing are the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey will not be split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represent a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products are daily and monthly. Details of the format of this product can be found in the TES Data Products Specifications (DPS) which is available from the LaRC ASDC site: http://eosweb.larc.nasa.gov/project/tes/DPS

TL3ATM_6 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This product consists of monthly atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels.

The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.

TL3ATD_6 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Daily Gridded Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This product consists of daily atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels.

The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.

TL2H2ON_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Water Vapor Nadir Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contains retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.

A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported.

The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied.

To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users of this product should also obtain the Ancillary Data product.

TL2H2ON_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Water Vapor Nadir Version 7 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.

Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix.

A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”

A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these sets. Thus, each limb s

TL2H2ONS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Water Vapor Nadir Special Observation Version 8 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.

A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consisted of four files, where each file was composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported.

The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied.

To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). Users of this product should also obtain the Ancillary Data product.

TL2H2ONS_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Water Vapor Nadir Special Observation Version 7 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits.

Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix.

A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.”

A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these se