Filtered boundary layer fluxes recorded on aircraft flights over the Konza

Filtered boundary layer fluxes recorded on aircraft flights over the Konza

Filtered boundary layer fluxes recorded on aircraft flights over the Konza

Detrended boundary layer fluxes recorded on aircraft flights over the Konza

Detrended boundary layer fluxes recorded on aircraft flights over the Konza

Detrended boundary layer fluxes recorded on aircraft flights over the Konza

The SIFSAP (Single Field-of-View Sounder Atmospheric Products) algorithm provides retrieval for each sounder Field of View (FOV), therefore, it has 3-times higher horizontal spatial resolution and 9-time denser products compared to other current IR sounder products. Since SiFSAP is an FOV-based algorithm, its product variables have an additional dimension which represents the number of FOVs. For CrIS instrument, there are 9 FOVs for each Field of Regard (FOR). The SiFSAP L3 products contain a variety of geophysical parameters retrieved from IR/MW sounder suites measurements, including atmospheric temperature profiles, water vapor, ozone profiles, clouds, and surface properties.

This monthly one half degree latitude by one half degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use). The Level-3 products maximize the yield of each individual variable and level by collecting all cases where the corresponding Level 2 quality control from the top of the atmosphere down to the level where the QC determines that the value is 0 (best) or 1 (good). Below this level, the data is rejected. This gives the greatest possible yield for any given level and variable.

The SIFSAP (Single Field-of-View Sounder Atmospheric Products) algorithm provides retrieval for each sounder Field of View (FOV), therefore, it has 3-times higher horizontal spatial resolution and 9-time denser products compared to other current IR sounder products. Since SiFSAP is an FOV-based algorithm, its product variables have an additional dimension which represents the number of FOVs. For CrIS instrument, there are 9 FOVs for each Field of Regard (FOR). The SiFSAP L3 products contain a variety of geophysical parameters retrieved from IR/MW sounder suites measurements, including atmospheric temperature profiles, water vapor, ozone profiles, clouds, and surface properties.

This daily one half degree latitude by one half degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use). The Level-3 products maximize the yield of each individual variable and level by collecting all cases where the corresponding Level 2 quality control from the top of the atmosphere down to the level where the QC determines that the value is 0 (best) or 1 (good). Below this level, the data is rejected. This gives the greatest possible yield for any given level and variable.

The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km.

The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.

This monthly one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products applying the comprehensive quality control (QC) methodology. Comprehensive QC accepts a retrieval if the profile is good to the surface and ensures consistent analysis across all levels and variables.

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 48.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/48.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.gov

This data set contains the monthly climatology data of the secondary forcing data for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing. The temporal resolution is monthly, ranging from January to December. The NLDAS-2 monthly climatology data are the monthly data averaged over the thirty years (1980 - 2009) of the NLDAS-2 monthly data. The file format is WMO GRIB-1.

A brief description about the NLDAS-2 hourly and monthly primary forcing data can be found from the GCMD DIFs for GES_DISC_NLDAS_FORB0125_H_V002 and GES_DISC_NLDAS_FORB0125_M_V002.

Details about the generation of the NLDAS-2 forcing datasets can be found in Xia et al. (2012).

The NLDAS-2 monthly climatology land surface forcing fields are grouped into two GRIB files, "File A" and "File B". "File B" is the secondary (optional) forcing file and contains ten fields. The data set applies a user-defined parameter table to indicate the contents and parameter number. The GRIBTAB file shows a list of parameters for this data set, along with their Product Definition Section (PDS) IDs and units.

For more information, please see the README Document.