TRACE-A_MetNav_AircraftInSitu_DC8_Data is the in situ meteorology and navigation data collected onboard the DC-8 aircraft during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data collection for this product is complete.

TRACE-A_TraceGas_AircraftInSitu_DC8_Data is the in-situ trace gas data collected onboard the DC-8 aircraft during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data from the Two Photon - Laser Induced Fluorescence (TP-LIF) and Differential Absorption of CO, CH4, N2O Measurements (DACOM) instruments are featured in this collection. Data collection for this product is complete.

The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. 

The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.

TRACE-A_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data collection for this product is complete.

The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. 

The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.

TRACE-A_TraceGas_AircraftInSitu_DC8_Data is the in-situ trace gas data collected onboard the DC-8 aircraft during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data from the Two Photon - Laser Induced Fluorescence (TP-LIF) and Differential Absorption of CO, CH4, N2O Measurements (DACOM) instruments are featured in this collection. Data collection for this product is complete.

The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. 

The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.

TRACE-A_Sondes_Data is the balloonsonde and ozonesonde data collected during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data collection for this product is complete.

The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. 

The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.

TRACE-A_Brazil_Data is the aircraft and rawinsonde data collected in Brazil during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data from the Advanced Very High Resolution Radiometer (AVHRR) is featured in this collection. Data collection for this product is complete.

The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. 

The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.

Level 1 irradiance files provide solar irradiance measured using the working solar diffuser. Each file includes the measured solar irradiance for all the North-South cross-track pixels. The files are provided in netCDF4 format, and contain information on radiometrically and wavelength calibrated solar irradiance for the UV and visible bands, corresponding noise, parameterized wavelength grid, solar viewing geometry, quality flags and other ancillary information. The product is produced using the L0-1b processor which includes multiple steps: (1) Image processing to produce radiometrically calibrated radiance, and (2) Additional wavelength calibration to improve wavelength registration.

Level 1 irradiance files provide solar irradiance measured using the working solar diffuser. Each file includes the measured solar irradiance for all the North-South cross-track pixels. The files are provided in netCDF4 format, and contain information on radiometrically and wavelength calibrated solar irradiance for the UV and visible bands, corresponding noise, parameterized wavelength grid, solar viewing geometry, quality flags and other ancillary information. The product is produced using the L0-1b processor which includes multiple steps: (1) Image processing to produce radiometrically calibrated radiance, and (2) Additional wavelength calibration to improve wavelength registration. Please refer to the ATBD for details.
These data are beta. Beta maturity is defined as: the product is minimally validated but may still contain significant errors; it is based on product quick looks using the initial calibration parameters.
Because the products at this stage have minimal validation, users should refrain from making conclusive public statements regarding science and applications of the data products until a product is designated at the provisional validation status.
The TEMPO Level 1 ATBD is still being finalized. For access to Version 1.0 ATBD, please contact the ASDC at larc-dl-asdc-tempo@mail.nasa.gov.

Level 1 reference irradiance files provide solar irradiance measured using the reference solar diffuser. Each file includes the measured solar irradiance for all the North-South cross-track pixels. The files are provided in netCDF4 format, and contain information on radiometrically and wavelength calibrated solar irradiance for the UV and visible bands, corresponding noise, parameterized wavelength grid, solar viewing geometry, quality flags and other ancillary information. The product is produced using the L0-1b processor which includes multiple steps: (1) Image processing to produce radiometrically calibrated radiance, and (2) Additional wavelength calibration to improve wavelength registration. Please refer to the ATBD for details.
These data are beta. Beta maturity is defined as: the product is minimally validated but may still contain significant errors; it is based on product quick looks using the initial calibration parameters.
Because the products at this stage have minimal validation, users should refrain from making conclusive public statements regarding science and applications of the data products until a product is designated at the provisional validation status.
The TEMPO Level 1 ATBD is still being finalized. For access to Version 1.0 ATBD, please contact the ASDC at larc-dl-asdc-tempo@mail.nasa.gov.

Level 1 reference irradiance files provide solar irradiance measured using the reference solar diffuser. Each file includes the measured solar irradiance for all the North-South cross-track pixels. The files are provided in netCDF4 format, and contain information on radiometrically and wavelength calibrated solar irradiance for the UV and visible bands, corresponding noise, parameterized wavelength grid, solar viewing geometry, quality flags and other ancillary information. The product is produced using the L0-1b processor which includes multiple steps: (1) Image processing to produce radiometrically calibrated radiance, and (2) Additional wavelength calibration to improve wavelength registration.

Total ozone Level 2 files provide ozone information at TEMPO’s native spatial resolution, ~10 km^2 at the center of the Field of Regard (FOR), for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The files are provided in netCDF4 format, and contain information on total column ozone and some auxiliary derived and ancillary input parameters including N-values, effective Lambertian scene-reflectivity, UV aerosol index, SO2 index, effective cloud fraction, effective cloud pressure, radiative cloud fraction, ozone below clouds, terrain height, geolocation, solar and satellite viewing angles, and quality flags. The retrieval is based on the OMI TOMS V8.5 algorithm adapted for TEMPO.